SikaFill®-7 Power CO

Use

• Waterproofing of roofs, terraces, and channel beams.
• It can be applied as a decorative and protective coating on mortar, concrete, unglazed tiles, clay tiles, fiber cement, wood, shingle tiles. For applications on other types of surfaces, it is recommended to perform prior tests in an area of ​​1m x 1m to verify that there is adequate adhesion.
• It is used to waterproof cracked walls, butts and facades (existing static cracks up to 0.5 mm) before painting.

Advantages

SikaFill®-7 Power CO  has a better performance than conventional acrylic waterproofing. Reinforced with fibres that avoid the use of reinforcing fabric in most cases*

• Polymers give it low fouling properties, which reduces maintenance frequency.
• Better bridges static cracks up to 0.5 mm.
• It has greater resistance to breaking stress since the fibers are distributed and dissipate the tension forces produced by cracks and movement of the roofs, reducing the probability of breaking the waterproofing.
• It is waterproof, resistant to weathering and aggressive atmospheric attack, UV radiation and ageing.
• It is easy, clean and quick to apply.
• Fast drying and high adhesion.
• Does not require protection with reflective paints.
• It can be applied on vertical surfaces.
• It does not deform in contact with water due to its low absorption.
• It is antifungal with a spectrum of protection against bacteria and yeast.

*Use Sika ^® felt FPP 30 reinforcement fabric in critical areas such as: details, downpipes, construction joints, cracks and changes in direction. The surface where it is applied must not present structural movements.

Packing

Bucket: 22 kg

Color

White, grey, red and